With the continuous use of CNC plasma cutting machine, users also have a deep understanding of its use methods. In many years of work practice, they have summarized several experiences for everyone to share, hoping to help you use CNC plasma cutting machine correctly, so as to prolong the service life of digital plasma cutting machine.

1. Prepare the plates to be cut. The deformation of carbon steel, stainless steel and aluminum shall be as small as possible, and the thickness shall not exceed the allowable range of the cutting table. Select the corresponding vulnerable parts according to the plate thickness and install them into the corresponding cutting torch.

2. Determine the single cutting torch, synchronous or symmetrical cutting, select the corresponding button on the operation panel, press the plasma button on the operation panel to make its internal light on, test the pre flow and cutting flow according to the requirements of the cutting table, adjust the pre flow and cutting flow, and manually adjust the initial height of the cutting torch to the height required by the cutting table; Set the arc voltage current according to the cutting table.

3. Manually set the cutting torch to the starting position; Select the cutting program on the system of CNC plasma cutting machine and complete the work configuration: cutting speed, slit compensation, etc., press the "go" button to start cutting, and deal with different problems in cutting according to the operation manual until the cutting is completed.