With the continuous development and update of technology, although the CNC fiber laser cutting machine is more and more convenient to operate, it is also necessary to pay attention to safety in the daily use process. How to use the CNC fiber laser cutting machine safely? How to use CNC fiber laser cutting machine correctly? This is a question that everyone needs to think about. In fact, many people do not have a set of real operating safety regulations in their hearts. How to use a CNC fiber laser cutting machine to be considered safe operation? Today I will give you the answer.

Every day before work

1. Check whether the water temperature of the laser and chiller is normal

2. Check whether the gas pressure meets the requirements

3. Check whether the exhaust fan, refrigeration dryer and industrial circulating chiller are working properly

4. Check whether the focusing lens is contaminated (the carbon dioxide laser directly pulls out the lens to observe, the fiber laser is running for half an hour and feels whether the temperature at the focusing lens housing is abnormal by hand, and the equipment can be turned on after ensuring that there is no abnormality.

 Daily work

1. Turn on the machine strictly in accordance with the sequence of power on and off to prevent the electrical components of the machine from being burned out

2. It is forbidden to turn on the power MCB with wet hands to prevent electric shock

3. When opening the liquid gas, the human face should not face the gas exhaust port to prevent frostbite. You must wear antifreeze gloves during operation. It is forbidden to smoke near the gas and in the workshop to prevent fire.

4. Confirm the type of material, material thickness and material size when cutting

5. After loading the program and adjusting the cutting parameters, simulate the cutting program, and then execute the cutting program after ensuring that it is correct

6. When operating the CNC fiber laser cutting machine, the radiation protection door of the machine must be closed

7. You must wear anti-radiation glasses when operating IPG lasers, otherwise it is forbidden to operate the machine

 8. It is forbidden to look directly at the cutting spark with the naked eye during the cutting process, otherwise stabbing the eyes

9. Non-professionals are forbidden to open the laser shell to prevent electric shock

10. It is strictly forbidden for the operator to leave the console while the machine is running

11. During operation, if the part rotates and needs to be dealt with, it is necessary to suspend the program and set the magnification to "0", and turn off the light before entering the working area of the machine tool to deal with the fault. The operator is dealing with the fault. No one is allowed to enter the operating area to manipulate the machine

In the production of CNC fiber laser cutting machine, you must pay attention to the operation process and precautions to avoid accidents. Only standardized operations can maintain safe production and protect yourself from damage.