CNC plasma cutting machines are now very common in various metal processing industries. But how can we really give full play to the functions of the CNC plasma cutting machine to achieve the best cutting effect? Please follow Jinan REBOUND CNC machine co.,ltd to find out it.

1. Gas flow rate of CNC plasma cutting machine

Increasing the gas flow can not only increase the arc column voltage, but also enhance the compression effect on the arc column, so that the plasma arc energy is more concentrated and the jet force is stronger, thus improving the cutting speed and quality. However, if the gas flow is too large, it will shorten the arc column, increase the heat loss, and weaken the cutting ability until the cutting process cannot be performed normally.

2. Cutting speed of CNC plasma cutting machine

The above various factors of plasma cutting machine speed directly affect the compression effect of the plasma arc, that is, the temperature and energy density of the plasma arc. The high temperature and high energy of the plasma arc determine the cutting speed, so the above various factors are related to the cutting speed. related. On the premise of ensuring the cutting quality, the cutting speed should be increased as much as possible. This not only improves productivity, but also reduces the amount of deformation of the cut parts and the heat-affected area in the kerf zone. If the cutting speed is not appropriate, the effect is opposite, and the sticking slag will increase and the cutting quality will decrease.

3. No-load voltage and arc column voltage of CNC plasma cutting machine

The plasma cutting power supply must have a high enough no-load voltage to easily start the arc and make the plasma arc burn stably. The no-load voltage is generally 120-600V, and the arc column voltage is generally half of the no-load voltage. Increasing the arc column voltage can significantly increase the power of the plasma arc, thus increasing the cutting speed and cutting larger thickness metal plates. The arc column voltage is often not reached by adjusting the gas flow and increasing the internal shrinkage of the electrode, but the arc column voltage cannot exceed 65% of the no-load voltage, otherwise the plasma arc will be unstable. The parameter setting directly affects the cutting effect of the CNC plasma cutting machine, so the influencing factors of the CNC plasma cutting machine are understood.

4. Cutting nozzle height of CNC plasma cutting machine

The height of the cutting nozzle refers to the distance from the end of the cutting nozzle to the surface of the workpiece to be cut. The distance is generally 4~10mm. It is the same as the internal shrinkage of the electrode, and the distance must be appropriate to give full play to the cutting efficiency of the plasma arc, otherwise the cutting efficiency and cutting quality will be reduced or the cutting nozzle will burn out.

5. Cutting current of CNC plasma cutting machine

Increasing the cutting current can also increase the power of the plasma arc, but it is limited by a large allowable current, otherwise the plasma arc column will become thicker, the slit width will increase, and the electrode life will decrease.

6. Electrode shrinkage of CNC plasma cutting machine

The so-called shrinkage refers to the distance between the electrode and the end surface of the cutting nozzle. A proper distance can make the arc be well compressed in the cutting nozzle, and cut by a plasma arc with concentrated energy and high temperature. If the distance is too large or too small, the electrode will be seriously burned, the cutting tip will be burnt and the cutting ability will be reduced. The shrinkage is generally 8-11mm.

Master the above 6 aspects of knowledge, you can improve the cutting quality of CNC plasma cutting machine.