Usually, after the holidays, we need to start the fiber laser cutting machine again when we go to work. However, during the general startup, if we do not develop good maintenance and maintenance habits, or the order of starting the machine, it may cause some problems in the use of our equipment. Then, let me share with you how to maintain the fiber laser cutting machine after starting it, so as to avoid errors and extend the service life of the machine.

Precautions for starting the metal fiber laser cutting machine after the holidays:

1. Do not place objects in the machine to avoid unnecessary damage to the machine.

2. Use cotton cloth to clean the dust and foreign matter on the metal oil tanker, metal shaft, slider and linear guide, then add lubricating oil, and perform empty reciprocating motion.

3. Add a little lubricating oil to the screws, including the screws on the laser tube support and the first reflector, which can facilitate disassembly and assembly during maintenance. Note: Do not add lubricating oil to the synchronous belt, drag chain, air pipe, motor, sensor, lens, and wire.

4. After the motion system has been working for a period of time, the screws and couplings at the motion connection will become loose, which will affect the stability of the mechanical movement. Therefore, during the operation of the machine, it is necessary to observe whether the transmission parts have abnormal sounds or abnormal phenomena, and if problems are found, they should be strengthened and maintained in time. At the same time, the machine should use tools to tighten the screws one by one after a period of time.

Daily maintenance matters of fiber laser cutting machine:

1. Clean dust and metal impurities. Dust cleaning is something that needs to be done for daily maintenance of every machine. A clean and tidy machine is also a guarantee for the quality of the product. The metal laser cutting machine mainly processes metal. Although the cut metal should be blown away soon, there will still be some residues. It is also important to clean these impurities.

2. Regularly count the use of the machine. Regularly insist on and record the parts of each part of the metal laser cutting machine, quickly replace the parts with poor performance, and then put the metal laser cutting machine in a relaxed working environment. Do not let the damaged parts drag down the use of the machine.

Through the above introduction, everyone should know how to maintain the metal fiber laser cutting machine. We should maintain the metal fiber laser cutting machine in the main details and develop good maintenance habits. Only in this way can we ensure the advantages of the fiber laser cutting machine and extend the service life of the laser machine.