1. CNC plasma cutting machine installation cutting torch When installing the CNC machine tool plasma cutting torch, the cutting torch must be installed correctly and carefully, taking into account several factors. Ensure that all parts cooperate well and ensure the circulation of gas and refrigerant torch products. Place all components on a clean velvet cloth to prevent dirt from sticking to the components. Add appropriate amount of grease to the O-ring, and adjust the brightness of the O-ring as a standard. Do not add too much grease.

2. Consumable parts should be replaced in time before they are completely damaged. During use, consumable parts such as cutting torchs and electrodes do not need to be replaced until they are completely damaged, because seriously damaged electrodes, nozzles and vortex rings will cause inoperability. Wait, the ion arc of CNC plasma cutting machine can easily cause serious damage to the cutting torch. Therefore, when it is found that the cutting quality has deteriorated, the consumable parts should be inspected immediately.

3． When cleaning the connecting threads of the cutting torch, replacing consumable parts or doing routine maintenance, be sure to ensure that the internal and inch threads of the cutting torch are clean. If necessary, clean or repair the connecting threads.

4. CNC plasma cutting machine cleans the surface of the electrode and nozzle. In many cutting torches, the surface of the nozzle and electrode is an energized surface. If these surfaces are dirty, the cutting torch will not work normally and should be cleaned with hydrogen peroxide. agent cleaning.

5. Check the fluidity and pressure of the torch and refrigeration air every day. If insufficient fluidity or leakage is found, the machine should be shut down immediately to check for faults.

6. CNC plasma cutting machine prevents cutting torch impact damage. In order to avoid cutting torch impact damage, it should be programmed appropriately to prevent the system from moving beyond the limit. Installing an anti-skid device can effectively prevent the cutting torch from being damaged during impact. It is succinctly emphasized that the equipment should be taken good care of during the entire process of reuse, ensure frequent inspection, early removal, and easy maintenance! Only by ensuring these aspects can we maximize its work, reduce application costs, and give full play to its maximum efficiency!