The metal fiber laser pipe cutting machine is a kind of equipment that uses laser to cut metal. In addition to having a higher manufacturing process, a high-quality pipe cutting machine also requires regular maintenance work, especially the chuck. Maintenance work is the basis for ensuring the normal operation of the equipment and the basis for ensuring high cutting results.

For different workpieces, you need to use different clamping methods or make special clamps for clamping. The standard chuck is more suitable for symmetrical tube types. If you use it reluctantly to clamp irregularly shaped workpieces, it will easily cause the chuck to be clamped. Abnormally reduces the life of the chuck.

Proper lubrication of the chuck can ensure that it still has good accuracy after long-term use, but incorrect or inappropriate lubrication can cause many problems, such as weakened clamping force, poor clamping accuracy, abnormal wear, etc. Therefore, we must operate according to the requirements when lubricating.

After the processing is completed, the chuck body and slide surface of the metal fiber laser pipe cutting machine need to be cleaned with a high-pressure air gun or similar tools. It is recommended that you remove the clamping jaws of the fiber laser pipe cutting machine chuck every 6 months for cleaning and lubrication. At the same time, check the components for cracks and wear. Seriously worn components need to be replaced immediately. After checking and ensuring that there are no abnormalities, it is necessary to lubricate the sliding surface of the clamping claw again before assembling it for use.