We often communicate with our customers and find that the biggest problem that bothers our customers is that after using metal CNC plasma cutting machine, or after some of our other cutting equipment, I always feel that one plate can solve the production, but it always takes two. Blocks are even more so that consumables are always more than expected or planned.

In fact, there are reasons for these, and we have been assisting customers in solving this problem.

The final reasons are as follows:

1. When our customers use metal CNC plasma cutting machine for a long time, the automatic cutting function may lose that function due to long-term use, so there will be consumables in the process of using metal CNC plasma cutting machine. The amount will be very large. If you lose this function, you can contact our after-sales staff to help you debug it, you don't need to wait for consumables all the time.

2. Often our customers are not very good at abiding by some rules and always want to challenge the authority. For example, when our metal CNC plasma cutting machine is cutting metal materials, the thickness of metal materials should generally not exceed 10mm., because generally if the metal material exceeds about 10mm, the nozzle is more expensive, and it may not produce anything once or twice. However, if it is used for a long time beyond the standard, the nozzle will be damaged more frequently, and the cutting effect will also be affected. Therefore, when buying a machine or using a machine, we must figure out our own needs, and read the product manual carefully, and follow the requirements. If you encounter any questions that you don’t understand, you can contact our after-sales staff in time.

Third, if we use the CNC cutting machine to perforate and cut at ordinary times, the general arc cutting at the edge may be laborious and the probability of loss of raw materials will be greater. Therefore, when you use a CNC cutting machine to operate this type of metal material, you must be careful, otherwise it will be one of the reasons for the loss of raw materials when you use a CNC cutting machine to operate.

Fourth, the use of knock-off spare parts wearing parts: Many customers feel that the price of original wearing parts is too much, and there are many cheap substitutes available on the market, so they are very excited and buy and use with a try mentality, but In fact, at this time, you have already jumped into a trap, that is, these fake wearing parts may be infringing on your machine step by step, and users are still complacent that these substitutes can replace the original genuine products. However, the original genuine product is the best match for your machine, and it is produced through continuous experiments by scientists. How can it be satisfied by any substitute merchant outside?

5. Another reason is that during the cutting process of the cutting nozzle, the current intensity of the power supply is too high, which may cause the cutting part to be cut too much when the cutting nozzle cuts the components.

Sixth, the repair and maintenance of the machine: if the machine is regarded as a human being, it is easy to understand that people need to rest, and they need to go to the doctor when they are sick. So the same is true of the machine. We don't need to let it work 24 hours a day, every day, and we have to overhaul it every once in a while to see if there is any problem. Only if we can find the problem in time, we will not bring the problem with it. The machines go to work, so that the raw materials are excessively wasted.

7. Sometimes, if the numerical control system of the metal numerical control plasma cutting machine is unstable, this kind of situation will also occur. Because the internal CPU and hard disk of the numerical control system may be used for a long time, it may cause heat, so the operating system will be unstable and cannot be normal. If the fan goes to work, or the fan is used for a long time, causing wear and tear, or the hard disk is vibrated or infected with a virus, causing production stagnation, such defects will occur, or lead to cutting errors, delay cutting production, and lead to excessive loss of raw materials. big.